Future-proof, this modular cabling system changes as your system changes! Imagine a VGA cable you can pull through a 3/4in conduit with a 90 degree sweep with no soldering of the HD15 connector! Or having the option of switching the installed cable from VGA to Component Video with Audio in less than a minute! With RapidRun(TM), you can easily do this and more. No cabling solution on the market will do more to make your installations easier or more versatile! RapidRun's(TM) revolutionary design provides the greatest flexibility and ease of installation without loss of signal quality. Two styles of Runner(TM) base cables, a 3-Coax with 4 twisted pairs and a 5-coax version, allow this unique interconnect system to be configured for UXGA, Component, Composite and/or Digital/Analog Audio Signals. The key to this RapidRun(TM) is our proprietary MUVI (Multi-Use Versatile Interconnect) connector design which features a locking mechanism that connects to either a Break-Away(TM) Flying Lead or Wall Plate. The MUVI connector also enables you to pull the Runner(TM) base cable through a 3/4in conduit then terminate with your flying lead or wall plate. RapidRun(TM) HT (5-Coax) Runner Features: Designed for audio/video applications, such as a home theater installation or a multi-room A/V hookup. Color-code: Blue. Compatible with blue-coded and green-coded Break-Away flying leads and wall plates. Constructed from (5) 28AWG 75Ohm mini coaxial cables. Coaxial lines feature a 90% shield copper braid for maximum flexibility while protecting against EMI/RFI. CMP rated jacket for use in air plenums and other commercial applications. Bend radius of less than 3/4in. (2) Protective dust caps with pulling eyes rated to 15lb/ft. Please note: each complete RapidRun solution requires a Break-Away or Wall Plate on either end of the Runner cable. For each Runner you will need (2) Break-Aways, (2) Wall Plates, OR (1) Break-Away and (1) Wall Plate. * RapidRun runner cables are designed to pull through 3/4in conduit including pre-manufactured 90 degree sweeps. 90 degree, 3/4in conduit sweeps bent by installers in the field may have smaller diameters than pre-manufactured sweeps, resulting in pulling diameter reductions of 15% or more. If you experience an issue installing RapidRun runner cables through field bent 3/4in conduit sweeps please contact your RapidRun sales professional.